Review: Litespeed T3 Disc blends disc brakes, bigger tires, and titanium ride
Review: Litespeed T3 Disc blends disc brakes, bigger tires, and titanium ride
10 August 2016
 

Stay around bicycles long enough, and you’re bound to hear someone gush about the magic of titanium. You know the mantra – lighter than steel, better ride qualities than aluminum, and less prone to rust and corrosion? It seems that there is little doubt that titanium as a material itself is an attractive product from which to build a bike.

When it comes to actually building that bike though, it would appear that all things are not created equal. It’s not the easiest material to work with due to its hardness and need for increased care when welding. Because of that, even the best titanium bike companies are still honing their craft. Whether that’s improving on the welds, trying different finishes, or experimenting with new tubing shapes and wall thicknesses, titanium bikes continue to improve.

Which brings us to one of the most accomplished Ti builders in the game – Litespeed. For more than 30 years now, Litespeed has been improving upon their interpretation of the perfect titanium build. They’ve also been working to improve their process as well, as they settle into their new manufacturing home. It’s still located in Chattanooga, TN, it’s just much bigger with more open space for improved work flow and room for expansion.

I got a chance to check out their new facility when I drove through Chattanooga to drop off the T3 Disc that I had been riding for the past few months. It was a sad moment to hand the bike over knowing that I had ridden my last ride with it, but I was able to get quite a few miles on the T3 before I turned over the keys…

 


 
When it comes to categorization, it’s hard to figure out just where to place the T3 Disc. Road bikes continue to evolve with the addition of disc brakes and bigger tire clearances which fits the story line of the T3. While it doesn’t have clearance for huge tires, it will fit bigger rubber. In this case it was fitted with Mavic’s 28mm Yksion Elite Guard tires on their Ksyrium Pro Disc All Road wheels result in a fairly large 28mm tire.
 


The T1 SL shown in Litespeed’s new front entry
 
But don’t let the bigger tires and disc brakes fool you. Unlike a lot of disc road bikes we’ve ridden, this is not a “comfort bike” with a tall head tube and slack angles. Instead, the T3 Disc features the same geometry as the T1 SL – Litespeed’s top level Ti race bike. That gives the T3 a decidedly quick demeanor.
 
 
 

This is where the bike’s split personality comes into play. On one hand, the stout frame, disc brakes, and big tires beg for you to take that dirt or gravel path. Charge those potholes. Just generally ride like you and your tires don’t give AF. But then the geometry has you looking forward to kitting up and tackling your local fast group ride. Sure, it may not be the lightest bike for the climbs, but you’ll make your attack on the descent. On one hand it’s a fast road bike. On the other it’s a quick all road bike. Versatility is a good thing.

 
 
 
Titanium may have a sweet ride, but don’t think the T3 won’t be stiff or efficient. Thanks to what seems to be mostly the swaging and butting process used by Litespeed, the T3 is surprisingly stiff from the head tube to the bottom bracket. It’s stiff enough that this is the type of bike that really rewards you for riding fast with a lot of power over rough roads. In general it’s usually better to power over the rough stuff, and it’s no different here. The rear end transmits bigger impacts directly through the seat, though this is tempered by surprisingly flexible seat stays which Litespeed claims help soften the ride. When I say surprisingly flexible, I mean physical surprise as Chris from Litespeed pushed down on the stays to show how much they actually flex – quite a bit. The T3 does possess a lot of that magic Ti feel, but with more modern performance mixed in for efficiency’s sake.


While the fork uses a 12x100mm thru axle, the rear of the bike still uses a 135mm quick release dropout. Neither the fork or the frame feature fender mounts, though both fender and rack mounts can be added to the frame for an additional charge. One interesting feature is the addition of a rear caliper brake mount which can be combined with the included axle spacer kit to make the bike 130mm QR, rim brake compatible. The Mavic 28mm tire and rim combo shown here looks to be the maximum tire size the frame will allow with the limitation at the chain stay.

While the fork uses a 12x100mm thru axle, the rear of the bike still uses a 135mm quick release dropout. Neither the fork or the frame feature fender mounts, though both fender and rack mounts can be added to the frame for an additional charge. One interesting feature is the addition of a rear caliper brake mount which can be combined with the included axle spacer kit to make the bike 130mm QR, rim brake compatible. The Mavic 28mm tire and rim combo shown here looks to be the maximum tire size the frame will allow with the limitation at the chain stay.
 
 
 

As pictured, the small T3 Disc came in at 18.43 lbs on my scale or 8.39 kg on the likely more accurate scale at Litespeed’s new HQ. Personally, at 5’8″ and with a slightly longer reach measurement, the Small frame was an excellent fit.